Powersport Batteries

Frequently Asked Questions

Match the battery case size, terminal layout, voltage, capacity, and battery chemistry approved for the machine. Powersport batteries often use tighter packaging and different terminal arrangements than automotive batteries.

Use a charger or maintainer matched to the battery's chemistry and size. High-amp car chargers can overcharge small powersport batteries, so a low-amp smart charger or maintainer is the safer choice, especially for winter storage. Lithium batteries need a charger with a lithium mode; a desulfation or recovery mode meant for lead-acid batteries can damage them.

Choose AGM for a lower-cost replacement that cranks well in the cold and works with most standard chargers. Choose lithium when saving weight matters most, such as on a race or performance machine; lithium batteries weigh much less and hold their charge longer in storage. They can crank more slowly in deep cold and need a charger or maintainer with a lithium setting, so check both before switching.

Start with the battery model number or BCI group size on your current battery or in the owner's manual, such as YTX14-BS or Group 31, then match the voltage, case size and terminal positions. Positive and negative terminals sit on different sides depending on the model, and a reversed layout can leave cables too short or touching the frame. Choose at least the original cold cranking amp rating, especially if you ride in cold weather.