Track Bars, Brackets, & Bushings

Stabilize Front End Geometry with Track Bars, Brackets, and Bushings
Ensure precise axle alignment and confident steering control with track bars and related components built to perform under pressure. Whether you're correcting suspension geometry after a lift or restoring factory ride quality, these parts are essential for reducing side to side axle movement and improving overall handling stability.

Our collection includes fixed and adjustable track bars, frame and axle side brackets, and high performance bushings designed for trucks, SUVs, and off road vehicles. Many components feature heavy duty steel construction, reinforced welds, and corrosion resistant finishes for long term durability in harsh conditions. Adjustable options allow for fine tuning alignment after suspension modifications, while upgraded bushings and brackets help eliminate flex, vibrations, and premature wear.

Ideal for lifted vehicles, daily drivers, and off road builds, these steering components help ensure that your axle stays centered and your ride stays smooth no matter the terrain.

Frequently Asked Questions

A track bar locates a solid axle side to side under the vehicle. Worn joints, bushings, or loose mounts can allow lateral axle movement, clunks, wandering, or instability. Inspect both ends and the mounting brackets for actual movement or damage. Similar symptoms can come from tie rods, ball joints, wheel bearings, or alignment, so confirm the track bar is the source before replacing it.

Often when a lift shifts a solid axle sideways or when the lift manufacturer calls for one. An adjustable track bar lets you recenter the axle and, on some applications, restore useful geometry. Mild lifts may not require it. Measure axle position and follow the lift-system recommendations instead of choosing an adjustable bar based only on the number of lift inches.

Match the vehicle and axle, front or rear position, lift height, mounting style, and the geometry specified by the suspension system. A replacement track bar changes the bar itself; a relocation bracket changes a mounting point. Use the correction recommended for the lift and steering layout, and make sure the bracket and bar do not create interference through full suspension travel.

Yes, when the off-center position is caused by the lift changing the track-bar arc. An adjustable track bar or an application-specific relocation bracket can recenter the axle. The correct solution depends on the suspension design and lift height. Check the axle position at ride height and follow the lift manufacturer's geometry recommendations rather than adjusting around worn bushings or damaged mounts.