$38.99
$43.00 SAVE: $4.01
Some T-One Connector harnesses, the ground wire is located in the incorrect cavity on the vehicle side of the harness connector. All current inventory is being reworked to correct this issue. For those with inventory, below is an in-field fix to make them function properly. 1. Using wire cutters, cut the white wire on the vehicle side of the tow plug connector. 2. Remove some insulation and place a ring terminal on the cut white wire. 3. Locate a suitable grounding point on the driver’s side near the connector. Drill a 3/32” hole and secure the white wire with ring terminal using a screw. 4. WARNING: Verify what is behind any surface before drilling to avoid damage to the vehicle and/or personal injury. Do not drill into any exposed surfaces.
1 YEAR
Draw-Tite T-One Connector
Draw-Tite 19-c rav4 t-one w/upgraded circuit protected modulite hd
Draw-Tite 17-22 crv t-one connector w/upgraded circuit protected modulite hd
2021-2024 Ford Bronco 4-Way Custom Wiring Harness
Draw-Tite T-One Connector Hitch Tow Kit
Curt Manufacturing 15-c transit 150/250 custom vehicle-to-trailer connector
Draw-Tite T-One Connector 4-Flat Wiring Harness
Draw-Tite T-One Connector
2022-2024 Ford Maverick 4-Way Custom Wiring Harness
Draw-Tite 21-c sorento t-one w/upgraded circuit protected hd modulite