$744.15
This is not eligible for promotional offers and coupons due to manufacturer restrictions.
Fabtech’s cutting edge RTS™ system has now been developed for the all new GM HD platform. The 6 in. RTS™ utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading. The 6 in. RTS™ system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point. High arched crossmembers and front differential skid plate are constructed of 1/4 in. thick steel to resist bending from hard front suspension impacts. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 in. RTS™ system allows the use of both 18 in. and 20 in. diameter wheels.
ProComp 5/16 pin co spanner asm
ProComp 07-18 jeep wrangler jk no drill hi-steer w/ attenuator
Bilstein Rear suspension kit b12 (special) toyota 4runner 2020-2003, fj cruiser 2014-2007
Bilstein Rear suspension kit b12 (special) toyota 4runner 2020-2003, fj cruiser 2014-2007
ProComp 99-13 gm1500 suv 2/4wd 1.5in rear leveling lift kit
ProComp 11-16 f350 4wd nitro 2.5in leveling lift kit; lift height 2.5in front/1.0in rear
ProComp 05-07 f250/ f350 4wd nitro 3.5in leveling lift kit; lift height 3.5in front/1.0-3.0in rear
ProComp 07-18 gmc sierra 1500 4wd strut
ProComp 05-07 f250/f350 4wd 2.5in leveling lift kit