$808.14
This is not eligible for promotional offers and coupons due to manufacturer restrictions.
This new Gen II system retains the factory track width keeping the tires under the fenders for a clean appearance. With the factory track width retained the front Sway Bar utilizes the stock end links and mounting holes keeping the leverage on the bar proper. There are no CV spacers, impact struts or add a leafs required for installation. The front differential is relocated in a manner so that when driving at higher 4 wheel drive speeds vibration is reduced. The GEN II Basic System utilizes a simplistic upper Coilover spacer that provides lift from the top of the shock rather than bottom up with reduced install time. Rear shocks are Performance Twin Tubes. All bracketry and the skid plate is constructed of 1/4 in. thick steel for maximum strength and proven reliability. The system passes FMVSS 126 standards for stability control functionality as tested by an independent lab.
ProComp 5/16 pin co spanner asm
ProComp 07-18 jeep wrangler jk no drill hi-steer w/ attenuator
Bilstein Rear suspension kit b12 (special) toyota 4runner 2020-2003, fj cruiser 2014-2007
Bilstein Rear suspension kit b12 (special) toyota 4runner 2020-2003, fj cruiser 2014-2007
ProComp 99-13 gm1500 suv 2/4wd 1.5in rear leveling lift kit
ProComp 11-16 f350 4wd nitro 2.5in leveling lift kit; lift height 2.5in front/1.0in rear
ProComp 05-07 f250/ f350 4wd nitro 3.5in leveling lift kit; lift height 3.5in front/1.0-3.0in rear
ProComp 07-18 gmc sierra 1500 4wd strut
ProComp 05-07 f250/f350 4wd 2.5in leveling lift kit