PullRite SuperGlide Quick Connect Capture Plate for 13-1/4" Wide Lippert #'s 1621/1116/1716 Pin Boxes|331705

By Pullrite
Model #331705

$149.00

This is not eligible for promotional offers and coupons due to manufacturer restrictions.

Quantity

Have a Question? Email hello@omnigarage.com

Description Specification Installation

Description

A Capture Plate is a required component of PullRite’s SuperGlide 5th wheel towing system. This plate is attached to your trailer’s skid plate. When you’re hooked up into your SuperGlide hitch and ready to tow, it isolates the rotation of your trailer’s king pin in the hitch. Movement and rotation are then transferred to the automatic cam action of your SuperGlide hitch, moving it away from the cab along its rails to prevent the trailer from contacting the cab of your truck! To determine the correct capture plate for your application, first find the manufacturer’s name and model number located on your pin box. Then make the necessary A, B, and C measurements. “A” measures the king pin plate from side-to-side. This is the most important measurement. Be sure that this measurement is no more than 1/16” less than the measurement listed. “B” measures the leading edge of the king pin to the leading edge of the king pin plate. “C” measures the rear edge to the leading edge of the king pin plate.

Specification

Features

PullRite Quick Connect Capture Plate
For Use with PullRite SuperGlide Hitches
Compatible with Some Lippert Model # 1621 (Long), 1116 (Medium), & 1716 (Long) Pin Boxes that are 13-1/4" Wide
Measurement A: 13-1/4" (King Pin Plate Width)
Measurement B for 1621: 3-3/8" (Leading Edge of King Pin to Leading Edge of King Pin Plate)
Measurement B for 1116: 3-1/2" (Leading Edge of King Pin to Leading Edge of King Pin Plate)
Measurement B for 1716: 3-1/4" (Leading Edge of King Pin to Leading Edge of King Pin Plate)
Measurement C for 1621 & 1716: 8-7/8" (Rear Edge to Leading Edge of King Pin Plate)
Measurement C for 1116: 9-3/16" (Rear Edge to Leading Edge of King Pin Plate)

Installation