Synergy Jeep Jk 2-Door 4.0In/ 4-Door 3.0In, Jeep Tj/Lj 4.5In Front Lift Springs

Features

• 2012+ JK's lifted over 2 inch will require exhaust spacers (5017), or a front aftermarket drive shaft to prevent interference with the exhaust
• For 2 Door JK's with 5.5 inch of lift or more, the Synergy Long Arm System is recommended
• For JK's with 35 inch tires, 3 inch bump stop spacers are recommended. With high fenders, shorter bump stop spacers can be used
• For JK's with 37 inch tires, 4 inch bump stop spacers are recommended. With high fenders, shorter bump stop spacers can be used
• For JK's with stock wheels or wheels with close to stock backspacing, 1-1/2 inch wheel spacers are recommended
• Lift heights listed for JK are for models with gas engines. Expect approximately 1 inch less lift on diesel models
• Springs retain the factory rake of the vehicle where the rear is higher than the front. Vehicle should sit level when loaded. Request one size shorter rear springs to level the vehicle out when unloaded
• When a 4 cyl engine is used, expect 0.5-1 inch more lift
• When a diesel engine is used, expect 1 inch less lift

Videos

Synergy Jeep Jk 2-Door 4.0In/ 4-Door 3.0In, Jeep Tj/Lj 4.5In Front Lift Springs # 1

×